PitchMaster 2093E
3U Eurocard Rack compatible format:
- 12HP width with Bantam/TT 4.4mm (ET) or mini-jack (EJ) sockets
- 160mm deep (180mm with power connector)
(Other panel formats may be custom ordered.)
Features:
- Precision voltage reference with 3ppm/°C temperature coefficient.
- Six low noise, precision DC mixers.
- Socketed ICs.
- High quality long life sealed rotary switches and conductive plastic pot.
- 2.5mm anodised aluminium panel.
- Re-wireable connectors.
I/O:
- 8 x balanced/unbalanced DC-coupled inputs. 100k ohm input impedance.
- 6 x balanced/unbalanced DC-coupled outputs, very low impedance.
DC Accuracy
Signal Levels:
- ±9V maximum on ±12V power
- ±12V maximum on ±15V power
Distortion:
Frequency Response:
- DC–18kHz < ±0.5 dB
- 28kHz -3 dB
Noise Floor:
Connectors:
- DB25 AES59 (Tascam) analogue pinout for inputs
- Molex KK 0.1" for outputs
- 4.4mm (TT Bantam) jack (balanced) or mini-jack (unbalanced)
Power:
- +/-12V to +/-15V
- Quiescent current: 45 mA (typical)
- Reverse and over voltage and over current protection.
-
10 pin MFJ power connector.
N.B. A suitable MFJ-10 power cable is supplied for connection to our Busbars or Euro 16-pin headers.
- High Quality Linear mains PSU available. N.B. The above specification cannot be guaranteed when run on other PSUs, especially switch mode types.
