 |
|
|
PinMix™
Specifications
PinMix 31x31
6U/9U Rack format:
- 84HP width with self-contained mains power supply.
- Balanced Bantam 4.4mm jacks on all inputs and outputs. Unbalanced Banana or Switchcraft Tini-Jax optional.
- DB25 rear panel I/O normalled through front panel Bantam jacks.
- 250mm deep.
I/O:
- 32 x balanced/unbalanced DC-coupled inputs. 100k ohm input impedance.
- 31 x balanced/unbalanced DC-coupled outputs, low impedance.
- All Gate and Trigger types available on rear panel. One on front panel.
- Headphone output on front panel, will drive 8Ω headphones.
- Stereo line drivers on rear panel for external amplifiers.
- Oscilloscope and Tuning Meter outputs on rear panel, following meter input.
PinMix 15x15
3U/6U Rack format:
- 84HP width with self-contained mains power supply.
- Banana, Switchcraft Tini-Jax, and Bantam 4.4mm jacks on all inputs.
- Any two of the above connectors on each output.
- 250mm deep.
I/O:
- 16 x balanced/unbalanced DC-coupled inputs. 100k ohm input impedance.
- 15 x balanced/unbalanced DC-coupled outputs, low impedance.
- Output Z may be used for main Gate with two of: Moog S-trig, full level (ARP) and low level (=5V) V-trig, Buchla Pulse or Hinton G+T.
All Systems
Features:
- 0.1% precision patch pins on 6mm pitch.
- Bi-colour LED indication of output signal.
- 2.5mm anodised aluminium panels.
Signal Levels:
Distortion:
Frequency Response:
- DC–20kHz < ±0.5 dB
- 90kHz -3 dB
Noise Floor:
- < -86 dBu (unweighted)
- No signal, all inputs routed: < -77 dBu (30 kHz filter)
BREAKTHROUGH:
- < -100 dB with +17 dBu signal
INSERTION LOSS:
- 50 Ω source: -0.05 dB
- 500 Ω source: -0.09 dB
Connectors:
- DB25 AES59 (Tascam) analogue pinout
- Front Panel: 4.4mm (TT Bantam) jacks (balanced) or Tini-Jax, 4mm Banana (unbalanced)
- Rear Panel: TRS 1/4" and XLRm (balanced), BNC 50Ω, Tini-Jax, 4mm Banana, Cinch-Jones 2-way (unbalanced)
Power:
- +/-15V with 800 mA for other modules
|
